Panel Manufacturing & Assembly
45 years of panel manufacturing experience in our Ahmedabad factory. Busbar fabrication, component assembly, and wiring carried out to approved drawings under ISO 9001:2015 quality control.
What This Service Covers
Key capabilities included in the Manufacturing & Assembly service.
Busbar fabrication
Electrolytic copper and aluminium busbars are cut, drilled, bent, and sleeved in-house. Sizes are verified against the approved design calculation.
Enclosure fabrication
Sheet-metal enclosures are fabricated and powder-coated in-house for standard sizes. Larger or special enclosures are sourced from approved vendors to our drawings.
Component assembly
ACBs, MCCBs, contactors, relays, and metering equipment are assembled to the approved GA drawing. All components are from approved vendor lists.
Wiring & termination
Panel wiring is carried out to the approved schematic and wiring diagram. Ferrule numbering, cable routing, and terminal tightening torques are documented.
Schneider PrismaSeT system
As a Schneider Electric authorised panel builder, we assemble PrismaSeT low-voltage switchboards using the certified system — maintaining type-test validity.
In-process quality checks
Dimensional checks, torque verification, and wiring continuity checks are carried out at defined hold points before the panel proceeds to final testing.
How It Works
A clear, documented process from first contact to completion.
Material procurement
Components and materials are procured from approved vendors against the approved BOM.
Busbar & enclosure fabrication
Busbars are cut, drilled, and sleeved. Enclosures are fabricated or received from vendors.
Component assembly
Switchgear, protection devices, and instruments are mounted to the approved GA drawing.
Wiring & termination
Panel is wired to the approved schematic. Ferrules, cable ties, and terminal tightening are completed.
In-process inspection
Hold-point inspections are carried out and recorded before the panel moves to testing.
Request a Quote for Manufacturing & Assembly
Share your project requirements and we will respond within 48 hours with a technical assessment and indicative offer.
Response within 48 hours · ISO 9001:2015 Certified